UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21983
                        
                            Issued:2015-03-27
                    
                            Revised:New
                    
                            Style
                            21983
                        
                            Multi-conductor cable with extruded non-integral jacket.
                    
			Rating105 deg C, 150 Vac; Cable flame; -60 deg C (optional); Oil Res 60 (optional); Sunlight Res (optional); Ozone Res (optional).
		
			Conductor50 AWG - 10 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's Procedure
		
			AssemblyTwo or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketTPU
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	105 deg C, 150 Vac; Cable flame; -60 deg C (optional); Oil Res 60 (optional); Sunlight Res (optional); Ozone Res (optional).

Conductor	50 AWG - 10 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's Procedure

Assembly	Two or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	TPU
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.