UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21993
                        
                            Issued:2015-05-19
                    
                            Revised:New
                    
                            Style
                            21993
                        
                            Multi-conductor cable employing a non-extruded covering
                    
			Rating80 deg C,150 Vac Horizontal Flame.
		
			Conductor50 AWG - 10 AWG, solid or stranded.
		
			InsulationExtrdued FRPE with 10 mils minimum average thickness, 9mils minimum thickness at any point
		
			AssemblyTwo or more insulated conductors laid in parallel
		
			ShieldHeat-sealed Aluminum tape, provided over the assembly, minimum 2.0 mils average thickness and 0.15 inch wide, minimum 20% overlap.
		
			CoveringHeat-sealed Polyester tape wrap, minimum 0.5 mils average thickness and 0.20 inch wide, minimum 20% overlap
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C,150 Vac Horizontal Flame.

Conductor	50 AWG - 10 AWG, solid or stranded.

Insulation	Extrdued FRPE with 10 mils minimum average thickness, 9mils minimum thickness at any point

Assembly	Two or more insulated conductors laid in parallel

Shield	Heat-sealed Aluminum tape, provided over the assembly, minimum 2.0 mils average thickness and 0.15 inch wide, minimum 20% overlap.

Covering	Heat-sealed Polyester tape wrap, minimum 0.5 mils average thickness and 0.20 inch wide, minimum 20% overlap

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.