UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            21996
                        
                            Issued:2015-04-27
                    
                            Revised:2022-08-25
                    
                            Style
                            21996
                        
                            Multiple-conductor Cable using Non-integral jacket.
                    
			Rating105 deg C, -40 deg C, 300 Vac, Horizontal Flame Test, Cable Flame Test; 60 deg C wet (required); Sunlight Res (required).
		
			Conductor50 AWG min., solid or stranded.
		
			InsulationExtruded PVC, 16 mils minimum average thickness, 14 mils minimum thickness at any point. Any Recognized Component (QMTT2) PVC Compound acceptable for use on Types THWN or THWN-2.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded PVC, Any Recognized Component (QMTT2) 720 hours sunlight Resistance PVC Compound.
		
			Diameter of core assembly under jacket(inch)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0 - 0.7003024
		
			0.701 - 1.0004536
		
			1.001 - 1.5006548
		
			1.501 - 2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal or External Use Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 21996	Issued:2015-04-27
			Revised:2022-08-25


Rating	105 deg C, -40 deg C, 300 Vac, Horizontal Flame Test, Cable Flame Test; 60 deg C wet (required); Sunlight Res (required).

Conductor	50 AWG min., solid or stranded.

Insulation	Extruded PVC, 16 mils minimum average thickness, 14 mils minimum thickness at any point. Any Recognized Component (QMTT2) PVC Compound acceptable for use on Types THWN or THWN-2.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional.

Shield	Optional.

Jacket	Extruded PVC, Any Recognized Component (QMTT2) 720 hours sunlight Resistance PVC Compound.
	Diameter of core assembly under jacket(inch)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0 - 0.700	30	24
	0.701 - 1.000	45	36
	1.001 - 1.500	65	48
	1.501 - 2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal or External Use Wiring.