UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22014
                        
                            Issued:2015-08-21
                    
                            Revised:New
                    
                            Style
                            22014
                        
                            Multiple-conductor cable using extruded non-integral jacket.
                    
			Rating90 deg C,600 Vac, Cable flame, 60 deg C Oil.
		
			Conductor30 AWG - 4/0 AWG, solid or stranded.
		
			InsulationExtruded TPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.
		
			AssemblyTwo or more singles or groups of twisted singles twisted together. A barrier layer and/or fillers optional. A separator required only where no shield, no covering provided and TPE insulation of the styrenic type were used. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional. Material other than PVC and TPE.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inches or less30 mils24 mils
		
			0.701-1.000 inches45 mils36 mils
		
			1.001-1.500 inches60 mils48 mils
		
			1.501-2.500 inches80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	90 deg C,600 Vac, Cable flame, 60 deg C Oil.

Conductor	30 AWG - 4/0 AWG, solid or stranded.

Insulation	Extruded TPE, 30 mils minimum average thickness, 27 mils minimum thickness at any point.

Assembly	Two or more singles or groups of twisted singles twisted together. A barrier layer and/or fillers optional. A separator required only where no shield, no covering provided and TPE insulation of the styrenic type were used. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional. Material other than PVC and TPE.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inches or less	30 mils	24 mils
	0.701-1.000 inches	45 mils	36 mils
	1.001-1.500 inches	60 mils	48 mils
	1.501-2.500 inches	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.