UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22022
                        
                            Issued:2015-12-03
                    
                            Revised:New
                    
                            Style
                            22022
                        
                            Multi-conductor cable with non-integral jacket
                    
			Rating90 deg C, 1000 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketTPE
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inces or less30 mils24 mils
		
			0.701-1.000 in45 mils36 mils
		
			1.001-1.500 in60 mils48 mils
		
			1.501-2.500 in80 mils64 mils
		
			2.501-4.000 in110 mils88 mils
		
			4.001 in or larger140 mils112 mils
		
			*Major dia if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	90 deg C, 1000 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	TPE
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inces or less	30 mils	24 mils
	0.701-1.000 in	45 mils	36 mils
	1.001-1.500 in	60 mils	48 mils
	1.501-2.500 in	80 mils	64 mils
	2.501-4.000 in	110 mils	88 mils
	4.001 in or larger	140 mils	112 mils
	*Major dia if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.