UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22026
                        
                            Issued:2015-12-07
                    
                            Revised:2015-12-09
                    
                            Style
                            22026
                        
                            Multi-conductor cable with extruded non-integral jacket
                    
			Rating80 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder and/or fillers may be employed.  Barrier layers, if employed, may be fibrous wrap servings, or braids; plastic tapes; thermoplastic coverings, or thermoplastic-tape wraps.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded FEP
		
			Diameter of cable under jacketMinimum averageMinimum at any point
		
			0.250 inch or less8 mils6 mils
		
			0.251-0.350 inch10 mils8 mils
		
			0.351-0.500 inch13 mils10 mils
		
			0.501-0.700 inch15 mils12 mils
		
			0.701-1.500 inch20 mils16 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22026	Issued:2015-12-07
			Revised:2015-12-09


Rating	80 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder and/or fillers may be employed. Barrier layers, if employed, may be fibrous wrap servings, or braids; plastic tapes; thermoplastic coverings, or thermoplastic-tape wraps.

Shield	Optional.

Covering	Optional.

Jacket	Extruded FEP
	Diameter of cable under jacket	Minimum average	Minimum at any point
	0.250 inch or less	8 mils	6 mils
	0.251-0.350 inch	10 mils	8 mils
	0.351-0.500 inch	13 mils	10 mils
	0.501-0.700 inch	15 mils	12 mils
	0.701-1.500 inch	20 mils	16 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.