UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22030
                        
                            Issued:2016-02-19
                    
                            Revised:New
                    
                            Style
                            22030
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Horizontal flame, Sun Res. (Optional).
		
			Conductor32 AWG minimum.  Labeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer, binders and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional, extruded over conductor assembly, 6 mils minimum thickness.
		
			ShieldOptional.
		
			JacketExtruded TPU.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.350 inch or less15 mils12 mils
		
			0.351-0.70030 mils24 mils
		
			0.701-1.00045 mils36 mils
		
			1.001-1.50060 mils48 mils
		
			1.501-2.50080 mils64 mils
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electronic equipment and appliances. Tags may indicate the following: "600 volts Peak for Electronic use only."
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, 300 Vac, Horizontal flame, Sun Res. (Optional).

Conductor	32 AWG minimum. Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer, binders and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional, extruded over conductor assembly, 6 mils minimum thickness.

Shield	Optional.

Jacket	Extruded TPU.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	15 mils	12 mils
	0.351-0.700	30 mils	24 mils
	0.701-1.000	45 mils	36 mils
	1.001-1.500	60 mils	48 mils
	1.501-2.500	80 mils	64 mils
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electronic equipment and appliances. Tags may indicate the following: "600 volts Peak for Electronic use only."