UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22031
                        
                            Issued:2016-02-19
                    
                            Revised:New
                    
                            Style
                            22031
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C,300 Vac, Cable flame, Sun Res. (Optional).
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo to eight insulated conductors laid flat or two or more twisted singles or groups of twisted singles, may be twisted together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Cable may be either straight or wound in retractile form.
		
			ShieldOptional.
		
			CoveringOptional - A 10 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.700 inches or less30 mils24 mils
		
			0.701-1.00045 mils36 mils
		
			1.001-1.50060 mils48 mils
		
			1.501-2.50080 mils64 mils
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection of appliances or electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C,300 Vac, Cable flame, Sun Res. (Optional).

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two to eight insulated conductors laid flat or two or more twisted singles or groups of twisted singles, may be twisted together or groups may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Cable may be either straight or wound in retractile form.

Shield	Optional.

Covering	Optional - A 10 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded TPU.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.700 inches or less	30 mils	24 mils
	0.701-1.000	45 mils	36 mils
	1.001-1.500	60 mils	48 mils
	1.501-2.500	80 mils	64 mils
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection of appliances or electronic equipment.