UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22040
                        
                            Issued:2016-06-09
                    
                            Revised:New
                    
                            Style
                            22040
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C,600 Vac Horizontal flame.
		
			Conductor32 AWG - 2000 kcmil, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketExtruded TPU and PVC (Inseparable Layers)
		
			Major diameter in inchesMinimum average thickness (mils)Minimum thickness at any point (mils)
		
			0 ¿ 0.7003024
		
			0.701 ¿ 1.0004536
		
			1.001 ¿ 1.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C,600 Vac Horizontal flame.

Conductor	32 AWG - 2000 kcmil, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	Extruded TPU and PVC (Inseparable Layers)
	Major diameter in inches	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0 ¿ 0.700	30	24
	0.701 ¿ 1.000	45	36
	1.001 ¿ 1.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.