UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22049
                        
                            Issued:2016-07-14
                    
                            Revised:New
                    
                            Style
                            22049
                        
                            Multiple-Conductor Cable Using Non-Integral Jacket
                    
			Rating90 deg C, 1000 Vac, Cable Flame.
		
			Conductor40 AWG minimum
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional, Extruded PVC, 6 mils minimum thickness at any point.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of Cable under jacket in inches*minimum avg. thickness in milsminimum thickness at any point in mils
		
			0.700 or less3024
		
			0.701 - 1.0006048
		
			1.001 - 1.5018064
		
			1.501 - 2.50011088
		
			* - Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring or Internal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	90 deg C, 1000 Vac, Cable Flame.

Conductor	40 AWG minimum

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional, Extruded PVC, 6 mils minimum thickness at any point.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of Cable under jacket in inches*	minimum avg. thickness in mils	minimum thickness at any point in mils
	0.700 or less	30	24
	0.701 - 1.000	60	48
	1.001 - 1.501	80	64
	1.501 - 2.500	110	88
	* - Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring or Internal Wiring.