UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22051
                        
                            Issued:2016-08-11
                    
                            Revised:2017-05-01
                    
                            Style
                            22051
                        
                            Multiple-conductor cable with extruded non-integral jacket.
                    
			Rating90 deg C, 600 Vac, Cable flame; Moisture Res 75 (required); Sunlight Res (required).
		
			Conductor50 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded PVC rated 90C dry and R/C QMTT2 rated minimum 75C wet, suitable for type THWN or see Facing Page for Compound, 15 mils min average, 13 mils minimum at any point.
		
			AssemblyTwo or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded TPE, R/C (QMTT2) suitable for 720hr Sunlight Resistant or see facing page for compound.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22051	Issued:2016-08-11
			Revised:2017-05-01


Rating	90 deg C, 600 Vac, Cable flame; Moisture Res 75 (required); Sunlight Res (required).

Conductor	50 AWG - 10 AWG, solid or stranded.

Insulation	Extruded PVC rated 90C dry and R/C QMTT2 rated minimum 75C wet, suitable for type THWN or see Facing Page for Compound, 15 mils min average, 13 mils minimum at any point.

Assembly	Two or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	Extruded TPE, R/C (QMTT2) suitable for 720hr Sunlight Resistant or see facing page for compound.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils


Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.