UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22063
                        
                            Issued:2016-10-26
                    
                            Revised:New
                    
                            Style
                            22063
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C,300 Vac Horizontal flame.
		
			Conductor32 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional. A 6 mils or heavier covering may be extruded over the conductor assembly.
		
			JacketExtruded TPU, 30 mils minimum average, 24 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring- for use with Material Handling Equipment where the cables are protected by Equipment Structure and where the acceptability is determined by UL LLC.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C,300 Vac Horizontal flame.

Conductor	32 AWG minimum, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional. A 6 mils or heavier covering may be extruded over the conductor assembly.

Jacket	Extruded TPU, 30 mils minimum average, 24 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring- for use with Material Handling Equipment where the cables are protected by Equipment Structure and where the acceptability is determined by UL LLC.