UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22066
                        
                            Issued:2016-11-09
                    
                            Revised:2016-11-15
                    
                            Style
                            22066
                        
                            Multiple conductor cable with extruded non-integral jacket
                    
			Rating80 deg C, 300 Vac, VW-1 flame.
		
			InsulationLabeled or complying with the manufacturer's AWM file.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded TPU
		
			Diameter of cable under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0 - 0.7003024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial - External Wiring with VW-1 Flame Rating only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22066	Issued:2016-11-09
			Revised:2016-11-15


Rating	80 deg C, 300 Vac, VW-1 flame.

Insulation	Labeled or complying with the manufacturer's AWM file.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	Extruded TPU
	Diameter of cable under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0 - 0.700	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special - External Wiring with VW-1 Flame Rating only.