UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22069
                        
                            Issued:2016-12-06
                    
                            Revised:2017-03-06
                    
                            Style
                            22069
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C,30 Vac Horizontal flame; Oil Res 60 (optional), Sunlight Resistance(optional).
		
			InsulationLabeled or complies with manufacturer's AWM Procedure.
		
			AssemblyTwo to four parallel, or two or more twisted insulted singles or groups of twisted singles twisted together or groups of twisted singles may be laid parallel to form flat or oval cable. Lay not specified.  Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly.  Diameter of assembly under jacket one inch maximum.
		
			ShieldOptional
		
			JacketExtruded PVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring of electronic equipment in Class 2 systems only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22069	Issued:2016-12-06
			Revised:2017-03-06


Rating	80 deg C,30 Vac Horizontal flame; Oil Res 60 (optional), Sunlight Resistance(optional).

Insulation	Labeled or complies with manufacturer's AWM Procedure.

Assembly	Two to four parallel, or two or more twisted insulted singles or groups of twisted singles twisted together or groups of twisted singles may be laid parallel to form flat or oval cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. Diameter of assembly under jacket one inch maximum.

Shield	Optional

Jacket	Extruded PVC, 9 mils minimum average thickness, 7 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring of electronic equipment in Class 2 systems only.