UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22070
                        
                            Issued:2016-12-06
                    
                            Revised:2017-03-06
                    
                            Style
                            22070
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C,300 Vac Cable flame; Oil Res 60 (optional), Sunlight Resistance (optional).
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable.  Lay not specified.  Barrier layer and/or fillers optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			CoveringOptional
		
			ShieldOptional
		
			JacketExtruded PVC;
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch and larger140 mils112 mils
		
			BraidOptional
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22070	Issued:2016-12-06
			Revised:2017-03-06


Rating	80 deg C,300 Vac Cable flame; Oil Res 60 (optional), Sunlight Resistance (optional).

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional

Shield	Optional

Jacket	Extruded PVC;
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch and larger	140 mils	112 mils

Braid	Optional

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment