UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22071
                        
                            Issued:2016-12-06
                    
                            Revised:2017-03-06
                    
                            Style
                            22071
                        
                            Multiconductor cable with extruded non-integral jacket
                    
			Rating80 deg C,30 Vac Cable flame; Oil Res 60 (optional), Sunlight Resistance (optional).
		
			Insulated ConductorLabeled or complying with AWM Procedure. 40 AWG minimum.
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together.  The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable.  The lay of the insulated conductors are not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			CoveringOptional, Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.
		
			ShieldOptional.
		
			JacketExtruded PVC;
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.350 inch or less20 mils17 mils
		
			0.351-0.700 inch30 mils24 mils
		
			0.701-1.000 inch40 mils36 mils
		
			1.101-1.500 inch54 mils48 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment in Class 2 circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22071	Issued:2016-12-06
			Revised:2017-03-06


Rating	80 deg C,30 Vac Cable flame; Oil Res 60 (optional), Sunlight Resistance (optional).

Insulated Conductor	Labeled or complying with AWM Procedure. 40 AWG minimum.

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional, Extruded PVC, 6 mils minimum thickness at any point, over the conductor assembly.

Shield	Optional.

Jacket	Extruded PVC;
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.350 inch or less	20 mils	17 mils
	0.351-0.700 inch	30 mils	24 mils
	0.701-1.000 inch	40 mils	36 mils
	1.101-1.500 inch	54 mils	48 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment in Class 2 circuits only.