UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22079
                        
                            Issued:2017-02-07
                    
                            Revised:New
                    
                            Style
                            22079
                        
                            Multi-conductor cable with extruded non-integral jacket
                    
			Rating105 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's Procedure.
		
			AssemblyConsists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			Strength MemberOptional.  A steel strength member insulated with the same grade and thickness of insulation as used on the circuit conductors, may be provided.
		
			ShieldOptional.
		
			CoveringOptional
		
			JacketExtruded PVC.
		
			Diameter of Core Assembly under Jacket@Minimum Average ThicknessMinimum Thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701 - 1.000 inch45 mils36 mils
		
			1.001 - 1.500 inch60 mils48 mils
		
			1.501 - 2.500 inch80 mils64 mils
		
			@ - Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	105 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's Procedure.

Assembly	Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Strength Member	Optional. A steel strength member insulated with the same grade and thickness of insulation as used on the circuit conductors, may be provided.

Shield	Optional.

Covering	Optional

Jacket	Extruded PVC.
	Diameter of Core Assembly under Jacket@	Minimum Average Thickness	Minimum Thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701 - 1.000 inch	45 mils	36 mils
	1.001 - 1.500 inch	60 mils	48 mils
	1.501 - 2.500 inch	80 mils	64 mils
	@ - Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.