UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22095
                        
                            Issued:2017-06-27
                    
                            Revised:New
                    
                            Style
                            22095
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Cable flame.
		
			Insulated ConductorLabeled or complies with manufacturer's Procedure.
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Each insulated conductor may be laid parallel and then 2 or more jackets may be co-extruded over each insulated conductor. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. Extruded PVC, 5 mils minimum thickness at any point, over the assembly or groups of singles.
		
			ShieldOptional. May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded PVC. If parallel construction is rippable, the measurements are made after ripping.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.250 inch or less20 mils16 mils
		
			0.251-0.424 inch30 mils24 mils
		
			0.425-0.700 inch60 mils48 mils
		
			0.701-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			* = Major diameter if flat or oval construction.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring in Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, 30 Vac, Cable flame.

Insulated Conductor	Labeled or complies with manufacturer's Procedure.

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Each insulated conductor may be laid parallel and then 2 or more jackets may be co-extruded over each insulated conductor. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. Extruded PVC, 5 mils minimum thickness at any point, over the assembly or groups of singles.

Shield	Optional. May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded PVC. If parallel construction is rippable, the measurements are made after ripping.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.250 inch or less	20 mils	16 mils
	0.251-0.424 inch	30 mils	24 mils
	0.425-0.700 inch	60 mils	48 mils
	0.701-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	* = Major diameter if flat or oval construction.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring in Class 2 Circuits only.