UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22096
                        
                            Issued:2017-06-27
                    
                            Revised:New
                    
                            Style
                            22096
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complies with manufacturer's Procedure.
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Each insulated conductor may be laid parallel and then 2 or more jackets may be co-extruded over each insulated conductor. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. Extruded PVC, 5 mils minimum thickness at any point, over the assembly or groups of singles.
		
			ShieldOptional. May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point. If parallel construction is rippable, the measurements are made after ripping.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring in Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulated Conductor	Labeled or complies with manufacturer's Procedure.

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Each insulated conductor may be laid parallel and then 2 or more jackets may be co-extruded over each insulated conductor. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. Extruded PVC, 5 mils minimum thickness at any point, over the assembly or groups of singles.

Shield	Optional. May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point. If parallel construction is rippable, the measurements are made after ripping.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring in Class 2 Circuits only.