UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22111
                        
                            Issued:2017-09-14
                    
                            Revised:New
                    
                            Style
                            22111
                        
                            Multi-conductor cable with non-integral jacket and parellel strength member.
                    
			Rating80 deg C,30 Vac Cable flame, Sunlight Resistance
		
			Insulated ConductorLabeled or complying with manufacturer's AWM procedure. 40 AWG minimum.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. Barrier layers, binders over groups of conductors and/or the complete conductor assembly, and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			Covering(Optional) A 6 mil or heavier PVC covering may be extruded over groups of conductors and/or over the complete conductor assembly.
		
			Shield(Optional) May be provided over groups of conductors and/or over the complete conductor assembly.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacket*Minimum average thicknessMinimum thickness at any point
		
			0.425 inch or less30 mils24 mils
		
			0.426-0.700 inch45 mils36 mils
		
			0.701-1.000 inch60 mils48 mils
		
			1.000-1.500 inch80 mils64 mils
		
			1.501-2.500 inch110 mils88 mils
		
			2.501 inch and larger	140 mils	112 mils						
* - Major diameter if cable is flat or oval
		
			Parallel Strength MemberIntegrated to jacket. The steel wire is covered by minimum 18 mils thickness PVC.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring or external interconnection.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C,30 Vac Cable flame, Sunlight Resistance

Insulated Conductor	Labeled or complying with manufacturer's AWM procedure. 40 AWG minimum.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. Barrier layers, binders over groups of conductors and/or the complete conductor assembly, and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	(Optional) A 6 mil or heavier PVC covering may be extruded over groups of conductors and/or over the complete conductor assembly.

Shield	(Optional) May be provided over groups of conductors and/or over the complete conductor assembly.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket*	Minimum average thickness	Minimum thickness at any point
	0.425 inch or less	30 mils	24 mils
	0.426-0.700 inch	45 mils	36 mils
	0.701-1.000 inch	60 mils	48 mils
	1.000-1.500 inch	80 mils	64 mils
	1.501-2.500 inch	110 mils	88 mils
	2.501 inch and larger 140 mils 112 mils * - Major diameter if cable is flat or oval

Parallel Strength Member	Integrated to jacket. The steel wire is covered by minimum 18 mils thickness PVC.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring or external interconnection.