UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22134
                        
                            Issued:2017-11-07
                    
                            Revised:2017-11-28
                    
                            Style
                            22134
                        
                            Multi-conductor cable with extruded non-integral jacket
                    
			Rating105 deg C, 300 Vac, Cable flame; Oil Res 75C (optional); -40C (optional).
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketTPE
		
			Diameter of cable under jacket (in)Minimum Average thickness (mils)Minimum thickness at any point (mils)
		
			0-0.7004536
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			2.501 and larger140112
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22134	Issued:2017-11-07
			Revised:2017-11-28


Rating	105 deg C, 300 Vac, Cable flame; Oil Res 75C (optional); -40C (optional).

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	TPE
	Diameter of cable under jacket (in)	Minimum Average thickness (mils)	Minimum thickness at any point (mils)
	0-0.700	45	36
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88
	2.501 and larger	140	112

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.