UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22140
                        
                            Issued:2017-12-08
                    
                            Revised:New
                    
                            Style
                            22140
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating150 deg C,90 Vac Cable flame.
		
			InsulationLabeled or complying with Manfacturer's AWM procedure.
		
			AssemblyTwo insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder and/or fillers may be employed.
		
			ShieldOptional
		
			CoveringOptional
		
			JacketExtruded FEP
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0. 250 or less86
		
			0.251-0.350108
		
			0.351-0.5001310
		
			0.501-0.7001512
		
			0.701-1.5002016
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring or External interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	150 deg C,90 Vac Cable flame.

Insulation	Labeled or complying with Manfacturer's AWM procedure.

Assembly	Two insulated conductors laid parallel or two or more individually insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. If more than one group is used, groups shall also be twisted together. The length of lay of the twisted conductors or groups is not specified. A binder and/or fillers may be employed.

Shield	Optional

Covering	Optional

Jacket	Extruded FEP
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0. 250 or less	8	6
	0.251-0.350	10	8
	0.351-0.500	13	10
	0.501-0.700	15	12
	0.701-1.500	20	16

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring or External interconnection of electronic equipment.