UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22144
                        
                            Issued:2018-02-06
                    
                            Revised:2018-03-02
                    
                            Style
                            22144
                        
                            Muliple-conductor cable with extruded non-integral jacket.
                    
			Rating80 deg C, No Voltage Specified; Cable flame; 60 deg C wet (required); 60 deg C Oil Res (Optional).
		
			InsulationLabeled or complying with manufacturer's AWM Procedure with minimum rating of 300V, 80C dry, 60C wet. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			Barrier LayerOptional barrier layer - may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. Optional barrier layer. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			CoveringOptional - Thermoplastic.
		
			ShieldOptional.  Metal braid or tape may be provided under the overall jacket.
		
			JacketTPU
		
			Dia.under jacket (inches)Minimum avg thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less4838
		
			0.701-1.0006048
		
			1.001-1.508064
		
			1.501-2.5011088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22144	Issued:2018-02-06
			Revised:2018-03-02


Rating	80 deg C, No Voltage Specified; Cable flame; 60 deg C wet (required); 60 deg C Oil Res (Optional).

Insulation	Labeled or complying with manufacturer's AWM Procedure with minimum rating of 300V, 80C dry, 60C wet. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Barrier Layer	Optional barrier layer - may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. Optional barrier layer. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Covering	Optional - Thermoplastic.

Shield	Optional. Metal braid or tape may be provided under the overall jacket.

Jacket	TPU
	Dia.under jacket (inches)	Minimum avg thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	48	38
	0.701-1.000	60	48
	1.001-1.50	80	64
	1.501-2.50	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.