UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22158
                        
                            Issued:2018-05-24
                    
                            Revised:New
                    
                            Style
                            22158
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 60 Vac, Cable flame.
		
			Conductor44 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded PFA, 6 mils minimum average thickness, 5 mils minimum at any point.
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded PVC.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			2.500 inch or less15 mils12 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring in Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, 60 Vac, Cable flame.

Conductor	44 AWG - 10 AWG, solid or stranded.

Insulation	Extruded PFA, 6 mils minimum average thickness, 5 mils minimum at any point.

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional.

Jacket	Extruded PVC.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	2.500 inch or less	15 mils	12 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring in Class 2 Circuits only.