UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22160
                        
                            Issued:2018-05-24
                    
                            Revised:2023-05-19
                    
                            Style
                            22160
                        
                            Multi-conductor cable with extruded non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM file
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional, metal tape(s) provided over the cable cored.
		
			BraidOptional, metal braid(s) provided over the metal tape(s).
		
			Inner JacketExtruded PVC, 18 mils minimum average thickness, 14 mils minimum thickness at any point.
		
			Outer JacketExtruded FEP, 10 mils minimum average thickness, 8 mils minimum thickness at any point.  The outer jacket shall be provided over the inner jacket.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22160	Issued:2018-05-24
			Revised:2023-05-19


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM file

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional, metal tape(s) provided over the cable cored.

Braid	Optional, metal braid(s) provided over the metal tape(s).

Inner Jacket	Extruded PVC, 18 mils minimum average thickness, 14 mils minimum thickness at any point.

Outer Jacket	Extruded FEP, 10 mils minimum average thickness, 8 mils minimum thickness at any point. The outer jacket shall be provided over the inner jacket.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.