APPLIANCE WIRING MATERIAL

Subj.758	Section 2	Page 22168	Issued:2018-06-06
			Revised:2018-07-25

Style 22168

Multi conductor cable with extruded non-integral jacket.

Rating	75 deg C, 30 Vac, Cable flame.
Conductor	32 AWG - 20 AWG, solid or stranded.
Insulation	Extruded LDPE, extruded simultaneously flat shaped insulation with parallel two conductors, having 7 mils minimum average thickness, 6 mils minimum thickness at any point and 10 mils minimum distance between conductors. May be small holes for drain wire.
Assembly	Two to eight units cabled twisted together. Each unit consists of one insulation with parallel two conductors, required tape shield with adhesive, filler, tape and/or tape binders with adhesive. A binder, fillers and/or tapes for overall assembly may be employed.
Shield	Required.
Jacket	Extruded PVC.
	Diameter of Cable Under Jacket (inches)	Minimum Average Thickness (mils)	Minimum Thickness at any point (mils)
	0.400 or less	24	19
	0.401 - 0.700	30	24
	0.701 - 1.500	45	36
	1.501 - 2.500	60	48
Standard	Appliance Wiring Material UL 758.
Marking	General.
Use	External Wiring.

UL and the UL Logo are trademarks of UL LLC © 2025