UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22169
                        
                            Issued:2018-06-12
                    
                            Revised:2023-10-17
                    
                            Style
                            22169
                        
                            Laminated flat ribbon cable.
                    
			Rating105 deg C,90 Vac Horizontal flame.
		
			Conductor40 AWG - 12 AWG, Flat or Round.
		
			InsulationPETP film 0.6 mils minimum thickness bonded each side of conductors, with polyester adhesive 0.4 mils minimum thicknes.  May be no adhesive directly above the round conductor. 8 mils minimum edge width and 5 mils minimum between conductors
		
			AssemblyConductors laid straight or irregular parallel in one plane. 
Round conductors area and flat conductors area may be repeated.
		
			ShieldOptional.  Metal faced polyester
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22169	Issued:2018-06-12
			Revised:2023-10-17


Rating	105 deg C,90 Vac Horizontal flame.

Conductor	40 AWG - 12 AWG, Flat or Round.

Insulation	PETP film 0.6 mils minimum thickness bonded each side of conductors, with polyester adhesive 0.4 mils minimum thicknes. May be no adhesive directly above the round conductor. 8 mils minimum edge width and 5 mils minimum between conductors

Assembly	Conductors laid straight or irregular parallel in one plane. Round conductors area and flat conductors area may be repeated.

Shield	Optional. Metal faced polyester

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.