UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22171
                        
                            Issued:2018-08-09
                    
                            Revised:New
                    
                            Style
                            22171
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 300 V
		
			Conductor50 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded ETFE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.
		
			AssemblyOne or two insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldRequired - Metal Braid with 85% coverage, or a Foil shield and drain wire
		
			JacketExtruded PVC, 28 mils minimum average thickness, 22 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing as Resistance Heater Wire where the acceptability has been determined by UL LLC.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	90 deg C, 300 V

Conductor	50 AWG - 10 AWG, solid or stranded.

Insulation	Extruded ETFE, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Assembly	One or two insulated conductors laid parallel or two or more insulated conductors or groups of insulated conductors cabled together. All conductors in any group twisted together. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Required - Metal Braid with 85% coverage, or a Foil shield and drain wire

Jacket	Extruded PVC, 28 mils minimum average thickness, 22 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing as Resistance Heater Wire where the acceptability has been determined by UL LLC.