UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22173
                        
                            Issued:2018-08-21
                    
                            Revised:2018-08-30
                    
                            Style
                            22173
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of one or more conductors or groups of conductors twisted together. The conductors or groups of conductors may be laid to form an oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional. Metal tape or braid.
		
			JacketExtruded TPE
		
			Dia of cable under jacketmils min averagemills min at any point
		
			0.700 in or less40 mils32 mils
		
			0.701-1.000 in45 mils36 mils
		
			1.001-1.500 in60 mils48 mils
		
			1.501-2.500 in80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or internal wiring of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22173	Issued:2018-08-21
			Revised:2018-08-30


Rating	80 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of one or more conductors or groups of conductors twisted together. The conductors or groups of conductors may be laid to form an oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional. Metal tape or braid.

Jacket	Extruded TPE
	Dia of cable under jacket	mils min average	mills min at any point
	0.700 in or less	40 mils	32 mils
	0.701-1.000 in	45 mils	36 mils
	1.001-1.500 in	60 mils	48 mils
	1.501-2.500 in	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or internal wiring of electronic equipment.