UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22179
                        
                            Issued:2018-09-18
                    
                            Revised:2019-04-11
                    
                            Style
                            22179
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 600 Vac, Horizontal flame.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted singles or groups of twisted singles twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded TPU with minimum average thickness 30 mils, minimum thickness at any point 24 mils.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22179	Issued:2018-09-18
			Revised:2019-04-11


Rating	90 deg C, 600 Vac, Horizontal flame.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted singles or groups of twisted singles twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional.

Jacket	Extruded TPU with minimum average thickness 30 mils, minimum thickness at any point 24 mils.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.