UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22181
                        
                            Issued:2018-10-19
                    
                            Revised:New
                    
                            Style
                            22181
                        
                            Multiple-conductor cable using non-integral jacket and non-extruded covering
                    
			Rating80 deg C,30 Vac, Cable flame, VW-1 flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated conductors.  Barrier layer and/or fillers optional.
		
			ShieldOptional.
		
			JacketExtruded PVC.
		
			Diameter of round assembly under jacket@Minimum average thicknessMinimum thickness at any point
		
			0-1.500 inch12 mils10 mils
		
			1.501-2.500 inch15 mils12 mils
		
			@The equivalent diameter of a flat assembly is calculated as 1.1284x(TW)^1/2 in which T is the thickness of the assembly under the jacket and W is the width of the assembly under the jacket.
		
			CoveringPolyester braid, 8 mils minimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring for use in or with Class 2 systems.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C,30 Vac, Cable flame, VW-1 flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more insulated conductors. Barrier layer and/or fillers optional.

Shield	Optional.

Jacket	Extruded PVC.
	Diameter of round assembly under jacket@	Minimum average thickness	Minimum thickness at any point
	0-1.500 inch	12 mils	10 mils
	1.501-2.500 inch	15 mils	12 mils
	@The equivalent diameter of a flat assembly is calculated as 1.1284x(TW)^1/2 in which T is the thickness of the assembly under the jacket and W is the width of the assembly under the jacket.

Covering	Polyester braid, 8 mils minimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring for use in or with Class 2 systems.