UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22191
                        
                            Issued:2018-11-27
                    
                            Revised:2019-11-07
                    
                            Style
                            22191
                        
                            Multiple-Conductor cable using non-integral extruded jacket
                    
			Rating105 deg C, 300 Vac, Cable Flame; Oil Res 60C or 80C (Optional), Moisture Resis 60C, 720hr Sunlight Resistance.
		
			InsulationLabeled or complies with manufacturer's AWM Procedure having a minimum rating of 60 deg C wet.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use mixed sizes of insulated singles.
		
			ShieldOptional - may be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded PVC. Recognized Component - Polymeric Materials for Use in Wire and Cable (QMTT2) 720 Hour Sunlight Resistant PVC Jacket Compounds or see Facing Page for compound
		
			dia of cable under jacket
		
			0.700 inches or less30 mils min average24mils minimum at any point
		
			0.701-1.000 dia45 avg36 min
		
			1.001-1.500 dia60 avg48 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22191	Issued:2018-11-27
			Revised:2019-11-07


Rating	105 deg C, 300 Vac, Cable Flame; Oil Res 60C or 80C (Optional), Moisture Resis 60C, 720hr Sunlight Resistance.

Insulation	Labeled or complies with manufacturer's AWM Procedure having a minimum rating of 60 deg C wet.

Assembly	Two or more twisted singles or groups of twisted singles twisted together. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use mixed sizes of insulated singles.

Shield	Optional - may be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded PVC. Recognized Component - Polymeric Materials for Use in Wire and Cable (QMTT2) 720 Hour Sunlight Resistant PVC Jacket Compounds or see Facing Page for compound
	dia of cable under jacket
	0.700 inches or less	30 mils min average	24mils minimum at any point
	0.701-1.000 dia	45 avg	36 min
	1.001-1.500 dia	60 avg	48 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.