UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22193
                        
                            Issued:2018-11-29
                    
                            Revised:New
                    
                            Style
                            22193
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 1000 Vac, Cable Flame.
		
			Conductor40 AWG minimum, solid or stranded round.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer, binders and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional, extruded over conductor assembly
		
			ShieldOptional
		
			JacketExtruded TPU ;
		
			Diameter of core assembly under jacketMinimum average thickness milsMinimum thickness at any point mils
		
			0.700 inch or less3024
		
			0.701-1.000 inch4536
		
			1.001-1.500 inch6048
		
			1.501-2.500 inch8064
		
			2.501-4.500 inch11088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal or internal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	90 deg C, 1000 Vac, Cable Flame.

Conductor	40 AWG minimum, solid or stranded round.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer, binders and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional, extruded over conductor assembly

Shield	Optional

Jacket	Extruded TPU ;
	Diameter of core assembly under jacket	Minimum average thickness mils	Minimum thickness at any point mils
	0.700 inch or less	30	24
	0.701-1.000 inch	45	36
	1.001-1.500 inch	60	48
	1.501-2.500 inch	80	64
	2.501-4.500 inch	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External or internal Wiring.