UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22225
                        
                            Issued:2019-04-11
                    
                            Revised:New
                    
                            Style
                            22225
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating90 deg C, 300 Vac, Cable flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer, binders and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPU ;
		
			Diameter of core assembly under jacketMinimum average thickness milsMinimum thickness at any point mils
		
			0.700 inch or less3024
		
			0.701-1.000 inch4536
		
			1.001-1.500 inch6048
		
			1.501-2.500 inch8064
		
			2.501-4.500 inch11088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	90 deg C, 300 Vac, Cable flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer, binders and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPU ;
	Diameter of core assembly under jacket	Minimum average thickness mils	Minimum thickness at any point mils
	0.700 inch or less	30	24
	0.701-1.000 inch	45	36
	1.001-1.500 inch	60	48
	1.501-2.500 inch	80	64
	2.501-4.500 inch	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.