UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22227
                        
                            Issued:2019-05-02
                    
                            Revised:2019-08-12
                    
                            Style
                            22227
                        
                            Multiconductor cable with extruded non-integral jacket
                    
			Rating300 deg C, 600 Vac; Oil Res 60C; Oil Res 80C; Gasoline Res; Cable Flame; VW-1
		
			InsulationLabeled or complying with AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers and metal shield are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketExtruded ECA
		
			Diameter under Jacketminimun average thickness (mils)mininimum thickness at any point (mils)
		
			0-0.350 inch108
		
			0.351-0.500 inch1310
		
			0.501-0.700 inch1512
		
			0.701-1.500 inches2016
		
			1.501-2.500 inches3024
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22227	Issued:2019-05-02
			Revised:2019-08-12


Rating	300 deg C, 600 Vac; Oil Res 60C; Oil Res 80C; Gasoline Res; Cable Flame; VW-1

Insulation	Labeled or complying with AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers and metal shield are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	Extruded ECA
	Diameter under Jacket	minimun average thickness (mils)	mininimum thickness at any point (mils)
	0-0.350 inch	10	8
	0.351-0.500 inch	13	10
	0.501-0.700 inch	15	12
	0.701-1.500 inches	20	16
	1.501-2.500 inches	30	24

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.