UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22229
                        
                            Issued:2019-05-10
                    
                            Revised:2020-01-13
                    
                            Style
                            22229
                        
                            Multi-Conductor Cable with Non-extruded Covering
                    
			Rating105 deg C,30 Vac Horizontal flame.
		
			ConductorSolid or stranded
		
			Insulated SinglesLabeled or complying with manufacturer's AWM Procedure having a minimum rating of 105°C and 30 V.
		
			AssemblyTwo or more singles, twisted pairs of groups of twiste d singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified.
		
			ShieldRequired, AL or AL/Polyester tape shield.
		
			CoveringNon-extruded PI tape, 1 mil minimum average thickness, 0.8 mil minimum thickness at any point, covering and shield is bonded with TPU or epoxy/polyester blends adhesive.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22229	Issued:2019-05-10
			Revised:2020-01-13


Rating	105 deg C,30 Vac Horizontal flame.

Conductor	Solid or stranded

Insulated Singles	Labeled or complying with manufacturer's AWM Procedure having a minimum rating of 105°C and 30 V.

Assembly	Two or more singles, twisted pairs of groups of twiste d singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified.

Shield	Required, AL or AL/Polyester tape shield.

Covering	Non-extruded PI tape, 1 mil minimum average thickness, 0.8 mil minimum thickness at any point, covering and shield is bonded with TPU or epoxy/polyester blends adhesive.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.