UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22232
                        
                            Issued:2019-05-15
                    
                            Revised:New
                    
                            Style
                            22232
                        
                            Multiconductor Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 600 Vac, Cable Flame, VW-1 Flame
		
			InsulationLabeled or complying with AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer, tape, and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPU - Consisting of a nonseparable Single Layer or Dual Layer with an intermediate textile or aramid braid reinforcement layer. The thickness of each individual layer is not specified.
		
			Diameter under Jacketmils min averagemils min at any point
		
			0-1.000in4536
		
			1.001-1.500in6048
		
			1.501-2.500in8064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, 600 Vac, Cable Flame, VW-1 Flame

Insulation	Labeled or complying with AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer, tape, and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPU - Consisting of a nonseparable Single Layer or Dual Layer with an intermediate textile or aramid braid reinforcement layer. The thickness of each individual layer is not specified.
	Diameter under Jacket	mils min average	mils min at any point
	0-1.000in	45	36
	1.001-1.500in	60	48
	1.501-2.500in	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.