UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22242
                        
                            Issued:2019-05-28
                    
                            Revised:New
                    
                            Style
                            22242
                        
                            Multiple-conductors cable using non-integral jacket
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Each insulated conductor or group of insulated conductors may be laid parallel and then 2 or more jackets may be co-extruded over insulated conductors. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded PVC, 13 mils minimum average thickness, 10 mils minimum thickness at any point. If parallel construction is rippable, the measurements are made before and after ripping.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Each insulated conductor or group of insulated conductors may be laid parallel and then 2 or more jackets may be co-extruded over insulated conductors. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional.

Jacket	Extruded PVC, 13 mils minimum average thickness, 10 mils minimum thickness at any point. If parallel construction is rippable, the measurements are made before and after ripping.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.