UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22244
                        
                            Issued:2019-05-20
                    
                            Revised:2020-12-02
                    
                            Style
                            22244
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket.
                    
			Rating105 deg C,600 Vac, Cable flame, VW-1.
		
			Conductor50 AWG - 4 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's Procedure.
		
			AssemblyTwo or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size
		
			ShieldOptional
		
			CoveringOptional inner layer
		
			JacketExtruded TPU -
		
			Dia of Cable under jacketmin averageminimum at any point
		
			0.700 inch or less32 mils26 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnect of appliances.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22244	Issued:2019-05-20
			Revised:2020-12-02


Rating	105 deg C,600 Vac, Cable flame, VW-1.

Conductor	50 AWG - 4 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's Procedure.

Assembly	Two or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size

Shield	Optional

Covering	Optional inner layer

Jacket	Extruded TPU -
	Dia of Cable under jacket	min average	minimum at any point
	0.700 inch or less	32 mils	26 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnect of appliances.