UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2225
                        
                            Issued:1959-05-01
                    
                            Revised:2011-12-06
                    
                            Style
                            2225
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating80 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			ConductorFour No. 20, 18 or 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.

			InsulationIntegral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of lighting circuits in electric refrigerators where exposed to temperatures not exceeding 80 deg C; or Internal wiring of lighting circuits in electric refrigerators where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2225	Issued:1959-05-01
			Revised:2011-12-06


Rating	80 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	Four No. 20, 18 or 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.

Insulation	Integral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of lighting circuits in electric refrigerators where exposed to temperatures not exceeding 80 deg C; or Internal wiring of lighting circuits in electric refrigerators where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.