UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22253
                        
                            Issued:2019-06-12
                    
                            Revised:2019-06-13
                    
                            Style
                            22253
                        
                            Multiple-Conductor Cable Using Extruded Non-Integral Jacket
                    
			Rating105 deg C,3000 Vac Cable flame.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional. Extruded PVC, 6 mils or heavier.
		
			ShieldOptional.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection or Internal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22253	Issued:2019-06-12
			Revised:2019-06-13


Rating	105 deg C,3000 Vac Cable flame.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more conductors or groups of conductors laid parallel or twisted forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional. Extruded PVC, 6 mils or heavier.

Shield	Optional.

Jacket	Extruded PVC
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection or Internal Wiring.