UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22258
                        
                            Issued:2019-08-26
                    
                            Revised:2019-08-23
                    
                            Style
                            22258
                        
                            Multiconductor cable with non-extruded covering
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG minimum.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure, The minimum voltage and temperature ratings of the singles shall be the rating of the overall cable.
		
			AssemblyTwo or more insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together to form a flat ribbon type cable or twisted to form a round cable. Parallel pairs may be shielded. Manufacturer shall maintain a record of all singles used in each cable. May include mixed AWG sizes.
		
			ShieldOptional.
		
			CoveringInner Covering. PTFE film, 0.7 mil min at any point.
		
			ShieldOptional.
		
			CoveringOuter Covering. Wrap Polyester film with polyester adhesive, one or two sheets, each sheet is 0.5 mil min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22258	Issued:2019-08-26
			Revised:2019-08-23


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG minimum.

Insulation	Labeled or complying with Manufacturer's AWM Procedure, The minimum voltage and temperature ratings of the singles shall be the rating of the overall cable.

Assembly	Two or more insulated singles, twisted pair triads or quads laid parallel in one plane, intermittently or continuously bonded together to form a flat ribbon type cable or twisted to form a round cable. Parallel pairs may be shielded. Manufacturer shall maintain a record of all singles used in each cable. May include mixed AWG sizes.

Shield	Optional.

Covering	Inner Covering. PTFE film, 0.7 mil min at any point.

Shield	Optional.

Covering	Outer Covering. Wrap Polyester film with polyester adhesive, one or two sheets, each sheet is 0.5 mil min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.