UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22262
                        
                            Issued:2019-09-03
                    
                            Revised:New
                    
                            Style
                            22262
                        
                            Multiple-Conductor Cable using Non-Integral Jacket
                    
			Rating80 deg C,30 Vac, Horizontal Flame, Cable flame.
		
			ConductorSolid or stranded.
		
			InsulationLabeled or complying with AWM Procedure having a minimum rating of 80 deg C, 30 Vac
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size
		
			CoveringOptional
		
			JacketExtruded FRPE.
		
			Diameter ofcore assembly under jacket(inch)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0 - 0.4001512
		
			0.401 - 0.7003024
		
			0.701 - 1.0004032
		
			1.001 - 1.5005443
		
			Outermost BraidRequired, Polyester material.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C,30 Vac, Horizontal Flame, Cable flame.

Conductor	Solid or stranded.

Insulation	Labeled or complying with AWM Procedure having a minimum rating of 80 deg C, 30 Vac

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size

Covering	Optional

Jacket	Extruded FRPE.
	Diameter ofcore assembly under jacket(inch)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0 - 0.400	15	12
	0.401 - 0.700	30	24
	0.701 - 1.000	40	32
	1.001 - 1.500	54	43

Outermost Braid	Required, Polyester material.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.