UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22264
                        
                            Issued:2019-09-10
                    
                            Revised:2019-09-09
                    
                            Style
                            22264
                        
                            Multiple Conductor Cable employing Extruded Non-Integral Jacket.
                    
			Rating80 deg C, No Voltage Specified, Cable Flame.
		
			InsulationLabeled AWM or Complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers, binders, tapes are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			JacketExtruded TPU - 30 mils minimum average thickness, 24 mils minimum at any point.
		
			CoveringExtruded TPU - 12 mils minimum average thickness, 10 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22264	Issued:2019-09-10
			Revised:2019-09-09


Rating	80 deg C, No Voltage Specified, Cable Flame.

Insulation	Labeled AWM or Complying with manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers, binders, tapes are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Jacket	Extruded TPU - 30 mils minimum average thickness, 24 mils minimum at any point.

Covering	Extruded TPU - 12 mils minimum average thickness, 10 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.