UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22269
                        
                            Issued:2019-10-08
                    
                            Revised:New
                    
                            Style
                            22269
                        
                            Multiple Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating90 deg C, 1000 Vac, Cable Flame; Oil Res 60C (optional); Sunlight Res (optional).
		
			InsulationLabeled or Complying with the manufacturer's AWM procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers, binders, tapes are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			Inner JacketExtruded PVC - 18 mils minimum average thickness, 15 mils minimum thickness at any point.
		
			Outer JacketExtruded FEP
		
			Diameter of assembly under jacket in inchesmils min. avg.mils min. at any point
		
			0-0.350108
		
			0.351-0.5001310
		
			0.501-0.7001512
		
			0.701-1.5002016
		
			1.501-2.5003024
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	90 deg C, 1000 Vac, Cable Flame; Oil Res 60C (optional); Sunlight Res (optional).

Insulation	Labeled or Complying with the manufacturer's AWM procedure.

Assembly	Consists of two or more conductors, twisted pairs, parallel pairs, or groups of twisted conductors or parallel pairs twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the insulated conductors are not specified. A barrier layer and/or fillers, binders, tapes are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Inner Jacket	Extruded PVC - 18 mils minimum average thickness, 15 mils minimum thickness at any point.

Outer Jacket	Extruded FEP
	Diameter of assembly under jacket in inches	mils min. avg.	mils min. at any point
	0-0.350	10	8
	0.351-0.500	13	10
	0.501-0.700	15	12
	0.701-1.500	20	16
	1.501-2.500	30	24

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.