UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22278
                        
                            Issued:2019-10-30
                    
                            Revised:2019-11-11
                    
                            Style
                            22278
                        
                            Multiple-conductor cable using non-intergral jacket
                    
			Rating105 deg C, 600 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			Strength MemberSteel bare galvanized 3/64" diameter 7x7 steel rope
		
			JacketExtruded TPE
		
			Dia. of cable under jacket in inches*mils min averagemils min. at any point
		
			0-0.7003024
		
			0.7001-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22278	Issued:2019-10-30
			Revised:2019-11-11


Rating	105 deg C, 600 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Strength Member	Steel bare galvanized 3/64" diameter 7x7 steel rope

Jacket	Extruded TPE
	Dia. of cable under jacket in inches*	mils min average	mils min. at any point
	0-0.700	30	24
	0.7001-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.