UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22279
                        
                            Issued:2019-11-07
                    
                            Revised:2019-11-18
                    
                            Style
                            22279
                        
                            Multiple-conductor cable using non-intergral jacket
                    
			Rating105 deg C,1000 Vac, Cable flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional
		
			CoveringOptional inner layer.
		
			JacketTPU, may be extruded in one layer or two non-separable layers.
		
			Diameter of core assembly under jacketMinimum averageMinimum at any point
		
			1.001-1.500 inch90 mils72 mils
		
			1.501-2.500 inch100 mils80 mils
		
			2.501 inch and larger120 mils96 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal interconnection of electronic equipment.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22279	Issued:2019-11-07
			Revised:2019-11-18


Rating	105 deg C,1000 Vac, Cable flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional

Covering	Optional inner layer.

Jacket	TPU, may be extruded in one layer or two non-separable layers.
	Diameter of core assembly under jacket	Minimum average	Minimum at any point
	1.001-1.500 inch	90 mils	72 mils
	1.501-2.500 inch	100 mils	80 mils
	2.501 inch and larger	120 mils	96 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External interconnection of electronic equipment.