UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22284
                        
                            Issued:2019-12-29
                    
                            Revised:New
                    
                            Style
                            22284
                        
                            Multiple conductor cable with extruded non-integral jacket.
                    
			Rating90 deg C, 600 V, Cable flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM File.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional. May be provided under or over covering, if provided.
		
			CoveringOptional.
		
			JacketExtruded TPU.
		
			Diameter of cable under jacketMinimum average thicknessMinimum thickness at any point
		
			1.000 inch or less55 mils44 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch and larger140 mils112 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	90 deg C, 600 V, Cable flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM File.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional. May be provided under or over covering, if provided.

Covering	Optional.

Jacket	Extruded TPU.
	Diameter of cable under jacket	Minimum average thickness	Minimum thickness at any point
	1.000 inch or less	55 mils	44 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch and larger	140 mils	112 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.