UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2229
                        
                            Issued:1959-05-01
                    
                            Revised:2011-07-28
                    
                            Style
                            2229
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating90 deg C, 300 Vac, FT2 flame. Optional - 60 or 80 deg C Oil.
		
			ConductorNo. 18 or 16 AWG consisting of No. 30 AWG or smaller strands.
		
			Integral Insulation and JExtruded PVC, 60 mils min average, 54 mils minimum at any point.
		
			AssemblyFour conductors, same as type SPT-3.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where exposed to temperatures not exceeding 90 deg C; or Internal wiring of electric refrigerators where exposed to temperatures not exceeding 90 deg C or where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2229	Issued:1959-05-01
			Revised:2011-07-28


Rating	90 deg C, 300 Vac, FT2 flame. Optional - 60 or 80 deg C Oil.

Conductor	No. 18 or 16 AWG consisting of No. 30 AWG or smaller strands.

Integral Insulation and J	Extruded PVC, 60 mils min average, 54 mils minimum at any point.

Assembly	Four conductors, same as type SPT-3.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where exposed to temperatures not exceeding 90 deg C; or Internal wiring of electric refrigerators where exposed to temperatures not exceeding 90 deg C or where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable). Polarity identification may be omitted.