UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22311
                        
                            Issued:2020-07-08
                    
                            Revised:2020-07-14
                    
                            Style
                            22311
                        
                            Multiple-Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating105 deg C,600 Vac Horizontal flame,  Optional - 60 deg C Oil, 75 deg C wet.
		
			Conductor40 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.  R/C QMTT2 insulation material rated for 75C water resistance required, when employed for wet location.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of twisted conductors may be laid parallel forming a flat, oval or round cable.  The lay of the conductors is not specified.  A barrier layer and/or fillers are optional.  Manufacturer shall maintain a complete description of each assembly.  May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional - Extruded TPE, SRPVC, PVC, FEP, PFA, EP or Nylon; 6 mils minimum thickness at any point.
		
			JacketExtruded TPE
		
			Diameter of core assembly under jacket (inches)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			1.501-2.50011088
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22311	Issued:2020-07-08
			Revised:2020-07-14


Rating	105 deg C,600 Vac Horizontal flame, Optional - 60 deg C Oil, 75 deg C wet.

Conductor	40 AWG minimum, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure. R/C QMTT2 insulation material rated for 75C water resistance required, when employed for wet location.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of twisted conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional - Extruded TPE, SRPVC, PVC, FEP, PFA, EP or Nylon; 6 mils minimum thickness at any point.

Jacket	Extruded TPE
	Diameter of core assembly under jacket (inches)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701-1.000	60	48
	1.001-1.500	80	64
	1.501-2.500	110	88

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.